Version=6
Bitte die Datei als .ini abspeichern und dann in den Asiga - Komposer importieren
Please save the file as .ini and then import it into Asiga Composer.
Veuillez enregistrer le fichier au format .ini, puis l'importer dans Asiga Composer.
Guarde el archivo como .ini y luego impórtelo en Asiga Composer.
Sla het bestand op als .ini en importeer het vervolgens in Asiga Composer.

[General]
Name="MACK4D Flexura"
Heater Temperature=30 ;°C
Heater Enable=true ;true/false
Minimum Temperature=28
IR Heater Enable=false
IR Heater Temperature=15
Slice Thickness Presets=[0.05, 0.1]
Slice Thickness=0.1


[:/Gen-2UV/General]
Printer Classes=[PRO, MAX, "PRO UV385", "MAX UV385", "PRO 4K UV385", "Ultra", "Max 2"] 

[:/Gen-2UV/Curing]
Light Intensity Control=1
Light Intensity=8

;MAX UV @ 4.0 mW/cm²
Z	=	[	10.0	,	0.04	,	4.00	]
Z	=	[	12.0	,	0.07	,	4.00	]
Z	=	[	14.0	,	0.09	,	4.00	]
Z	=	[	16.0	,	0.11	,	4.00	]
Z	=	[	18.0	,	0.12	,	4.00	]
Z	=	[	20.0	,	0.13	,	4.00	]
Z	=	[	24.0	,	0.16	,	4.00	]
Z	=	[	28.0	,	0.18	,	4.00	]
Z	=	[	32.0	,	0.20	,	4.00	]
Z	=	[	36.0	,	0.22	,	4.00	]
Z	=	[	40.0	,	0.23	,	4.00	]
Z	=	[	60.0	,	0.29	,	4.00	]
Z	=	[	100.0	,	0.36	,	4.00	]
Z	=	[	160.0	,	0.43	,	4.00	]
Z	=	[	200.0	,	0.46	,	4.00	]




Offset=0.15
Burn-In Layers=1
Burn-In Exposure=0.29 ; mm
Border Exposure=110
Border Width=0.4
Support Exposure=110
Antialiasing=0


XY Compensation=-0.010
Burn-In XY Compensation=-0.100
Z Compensation=0.2

Scale=[1.005, 1.005, 1]  

[:/Gen-2UV/Mechanics]
Burn-In Separation Velocity=2.475; mm/s
Separation Velocity=4.3; mm/s
Burn-In Separation Acceleration=0.1
Separation Acceleration=0.2

Motor Timeout=120


[:/Gen-2UV/Delays]
Burn-In Wait Time (After Exposure)=5 ; s
Burn-In Wait Time (After Separation)=0 ; s ; for material flowback
Burn-In Wait Time (After Approach)=30
Normal Wait Time (After Exposure)=1
Normal Wait Time (After Approach)=1

;_________Ultra_START______
[:/ULTRA-Platform/General]
Printer Classes=["Ultra"]

[:/ULTRA-Platform/Curing]
Light Intensity Control=1
Burn-In Light Intensity=6
Light Intensity=6


[:/ULTRA-Platform/Delays]
Burn-In Wait Time (After Exposure)=2 ; s
Burn-In Wait Time (After Separation)=0 ; s 
Burn-In Wait Time (After Approach)=30 ; s
Normal Wait Time (After Exposure)=1 ; s
Normal Wait Time (After Separation)=0 ; s  
Normal Wait Time (After Approach)=1; s
;_________Ultra_END______

[Support]
Leveling=false
Leveling Height=2.0
Minimum Height=3
Tallest=false
Tallest Height=0.0
Slope=40
Side Feature=2.0
Spacing=5.0
Strength=40
Torsion=0
Intersupport=false
Island=1.2
Contact=1
Overshoot=2.5
MaximumWidth=2
Side Faces=20
AspectRatio=3.0
SprueX=5
SprueY=5