Jewelery Supplies

Find products for 3D printing for jewelers here.

Tip
3D LCD Printer SOL from Ackuretta
 SOL sets the bar for high-speed and high-precision 3D printing. Achieve three times the speed of a regular LCD printer and maximize accuracy thanks to its 95+% LED light uniformity. The dynamic LED auto-selects curing areas to enhance accuracy and extend component life.+ 54 LEDs calibrated+ More than 100 prevalidated materials+ Ultra accurate & consistent (49μm pixel-size)+ Anti-drip LCD panel protection+ Industry-leading 2-year warrantyYour SOL comes with:1x FREE Extra Vat1x FREE Extra Print LCD ScreenFREE Alpha 3D LicenseFREE Basic Support Plan

€4,950.00*
Tip
Castable Resin Material for 3D Printing for Jewelry | TIKO-G
Color: red | Content: 1 kg
TIKO-G is the first product of a new generation of compression resins. TIKO-G is the first cast material with a proportion of over 20% of sustainable raw materials. TIKO-G is absolutely dimenstion stable after printing. No matter if poured directly after printing or only after a week. The dimension always remains the same.TIKO-G burns ash-free even at temperatures up to 700°TIKO-G can be processed with common DLP, SLA and LCD printers.TIKO- G has been developed and is produced in Germany. Color: red Content: 0.5kg / 1 kg .btn-flyer-download { transition-duration: 0.4s; } .btn-flyer-download:hover { background-color: #b30000; color: white; } .btn-flyer-download{ background-color: #4CAF50; /* Green */ border: none; color: white; padding: 10px 40px; text-align: center; text-decoration: none; display: inline-block; font-size: 16px; border-radius: 8px; text-align:left; background-color: red; } Download Productinformation .column { float: left; width: 25%; padding: 10px; height: 300px; /* Should be removed. Only for demonstration */ text-align:center; background-color: transparent; } /* Clear floats after the columns */ .row:after { content: ""; display: table; clear: both; background-color: transparent; } .dot { height: 55px; width: 55px; text-align: center; display: inline-block; background-image:url('/media/98/e5/7f/1632732860/1.png'); } @media screen and (max-width: 648px) { .column { width: 50%; height: 250px; } @media screen and (max-width: 330px) { .column { width: 100%; height: 240px; }}   100% ash-free combustion from 700 degrees   100% dimensionally stable after printing   For all DLP, SLA and LCD printers   Made from 20% + sustainable raw materials /* Three image containers (use 25% for four, and 50% for two, etc) */ .column1 { float: left; width: 33.33%; padding-left: 9%; padding-right:9%; padding-top:2%; padding-bottom:2%; margin:auto; text-align:center; align:center; } /* Clear floats after image containers */ .row1::after { content: ""; clear: both; display: table; } @media screen and (max-width: 600px) { .column1 { width: 100%; padding-left: 8%; padding-right:8%; padding-top:2%; padding-bottom:2%; }   Castable resin for innovative goldsmiths     Castable Resin Burnout - Sequence of the lost wax casting process   The lost wax process is a molding process for glass and metal casting. Usually, one-piece molds are made of wax. In the course of the process, not only the model but also the mold is destroyed. In the lost wax process, the model is provided with both sprue and vent channels.   1. Preparation Preparation of molding material and coating with molding material/investment material, which leads to the formation of green mold. 2. Melting out the green mold Melting out the green mold creates a mold cavity, which is dried in the case of water-containing molding materials. For plaster models, partial vacuum drying is required beforehand. 3. Melting process Depending on the investment material, firing of the mold takes place. The molten glass or metal is poured into the respective mold. The molten mass solidifies in the mold. Now the mold is smashed so that the raw casting can be removed.   Customer reviews of TIKO-G   .columnreview { float: left; width: 25%; padding: 10px; height: 345px; /* Should be removed. Only for demonstration */ text-align:left; background-color: white; } img { float: left; width: 100%; height: auto; /* Should be removed. Only for demonstration */ text-align:center; background-color: white; } /* Clear floats after the columns */ .row2:after { content: ""; display: table; clear: both; background-color: white; } @media screen and (max-width: 648px) { .columnreview { width: 50%; height: 255px; } @media screen and (max-width: 500px) { .columnreview { width: 50%; height: 270px; } @media screen and (max-width: 420px) { .columnreview { width: 50%; height: 315px; }   Thank you!! We were allowed to test the new resin with as first. Thanks again to the Mack4D team. :-) Marise de G.   Compatible with our DLP. Everything as expected!Jens M.   Finally! I'm really glad that now also times our industry of goldsmiths wakes up and becomes sustainable. 20% sustainable raw materials in TIKO-G are a good start in the right direction.Julia K.   It works! Was skeptical at first... but integrates well with our customer process. Burns after triple testing always completelyRudolph K. .banner5{ width:100%; overflow:hidden; height:100%; background-color:#FF9A9A; } .beratungzumprodukt { transition-duration: 0.4s; } .beratungzumprodukt:hover { background-color: #b30000; color: white; } .beratungzumprodukt{ background-color: #4CAF50; /* Green */ border: none; color: white; padding: 10px 40px; text-align: center; text-decoration: none; display: inline-block; font-size: 16px; border-radius: 8px; text-align:left; background-color: red; } .column2 { float: left; width: 20%; padding: 10px; height: 290px; /* Should be removed. Only for demonstration */ text-align:left; background-color:#FF9A9A; } .column3 { float: left; width: 30%; padding: 10px; height: 290px; /* Should be removed. Only for demonstration */ text-align:left; background-color:#FF9A9A; } .column4 { float: left; width: 30%; padding: 10px; height: 30px; /* Should be removed. Only for demonstration */ text-align:left; background-color:#FF9A9A; } /* Clear floats after the columns */ .row:after { content: ""; display: table; clear: both; } @media screen and (min-width: 706px) and (max-width: 976px) { .column2 { float: left; width: 5%; padding: 10px; height: 280px; text-align:left; background-color:#FF9A9A; } .column3 { float: left; width: 55%; padding: 10px; height: 280px; text-align:left; background-color:#FF9A9A; } .column4 { float: left; width: 32%; padding: 10px; height: 20px; /* Should be removed. Only for demonstration */ text-align:left; background-color:#FF9A9A; } } @media screen and (min-width: 706px) and (max-width: 10976px) { .banner5{ display:block; } .column3{ display:block; } .column4{ display:block; } .imgcolumn4{ display:block; } .spaceinbetween{ display:block; } .banner9{ display:none; } } @media screen and (min-width: 0px) and (max-width: 705px) { .banner5{ display:none; } .column3{ display:none; } .column4{ display:none; } .imgcolumn4{ display:none; } .spaceinbetween{ display:none; } } @media screen and (min-width: 0px) and (max-width: 10703px) { .banner8 { display: none; } /* show it on small screens */ } @media screen and (min-width: 0px) and (max-width: 705px) { .banner9 { display: block; } /* show it on small screens */ } @media screen and (min-width: 0px) and (max-width: 705px) { .banner8space { display: block; } /* show it on small screens */ } @media screen and (min-width: 706px) and (max-width: 10698px) { .banner8space { display: none; } /* show it on small screens */ } @media screen and (min-width: 0px) and (max-width: 648px) { .banner9spacebetween { display: block; } /* show it on small screens */ } @media screen and (min-width: 649px) and (max-width: 10648px) { .banner9spacebetween { display: none; } /* show it on small screens */ } .banner8 { align:center; text-align:center; background-color:#FF9A9A; } .beratungzumproduktt { transition-duration: 0.4s; } .beratungzumproduktt:hover { background-color: #b30000; color: white; } .beratungzumproduktt{ background-color: #4CAF50; /* Green */ border: none; color: white; padding: 10px 40px; text-align: center; text-decoration: none; display: inline-block; font-size: 16px; border-radius: 8px; text-align:left; background-color: red; } Product consultation Do you have questions about the product? Let us advise you free of charge! Get free advice +49 (0) 34342 540640 Marc Hütt, CEO   Product consultation You have questions about the product? Let us advise you free of charge!  Get free advice   +49 (0) 34342 540640  Marc Hütt, CEO   Product consultation Do you have questions about the product? Let us advise you free of charge!  Get free advice   +49 (0) 34342 540640  Marc Hütt, CEO Castable Resin TIKO-G supports popular 3D printers  TIKO-G Castable Resin is the first jewelry casting resin made from more than 25 percent renewable raw materials. In addition to its sustainability, TIKO-G Castable Resin scores with its outstanding product properties. The material is absolutely dimensionally stable after printing, so you can embed the printed model immediately. In addition, TIKO-G Castable Resin is compatible with most 3D printers. AdvantagesSuitable for all models created in the investment casting process. Can be burned out. No expansion occurs during burnout. Low ash content during the burnout process. Sublimation starts at 130 degrees Celsius. Compatible with many gypsum-bonded investments. Very high detail accuracy. Excellent casting of small engravings (both positive and negative). Perfect, smooth surfaces. Cleaning with commercial spirit.   TIKO-G for DLP Printers  TIKO-G's burn-out, castable resin is monomer-based and excellent for LCD as well as DLP 3D printers. Both handling and post-processing are very easy. TIKO-G is suitable for all models produced by investment casting. The castable resin is used in jewelry and dental models. Using CAD programs, dentists, jewelers and designers can design their objects digitally and produce them immediately afterwards - in maximum resolution (depending on the printer).   Our Castable Resin for SLA Printer  Our Castable Resin is a castable resin for use with SLA and DLP 3D printers. You can use the TIKO-G for all investment cast models. Classic applications include jewelry and dental models. After jewelers and dentists as well as designers have created their designs using CAD programs, they can immediately turn the respective designs into reality. TIKO-G allows you to cast optimally with common wax equipment and plaster-bonded investment materials. The photopolymer, which is filled with up to 80 percent wax, not only burns out cleanly, but without any ash content. The castable resin captures very complex details and allows for very smooth surfaces. This results in high-strength jewelry pieces that require large amounts of metal. The high accuracy of the details allows excellent reproduction of lettering, pavé settings or very thin lines. Even at lower temperatures of 750 degrees Celsius, full burnout is guaranteed, which is the best solution for stone presetting.   Jewelry Resin for LCD Printer  TIKO-G's castable resin adopts in both LCD and DLP 3D printers. It is used in highly detailed models of all types of investment casting processes. Dentists and jewelers in particular swear by castable resin because they can easily design their objects using CAD programs and then immediately create an investment casting mold. Especially for the realization of complicated models with high dimensional accuracy, TIKO-G is the ideal solution. It enables perfect casting quality with any investment material. .wrapper1 { max-width: 80%; width: 80%; margin: 10vh auto; } input { display: none; } .label1 { display: flex; width: 100%; height: 40px; cursor: pointer; border: 3px solid #3E474F; user-select: none; } .label1 div:first-child { width: 100%; line-height: 45px; margin-left: 10px; font-size: 1.2em; } .cross{ margin-right:15px; margin-top:3px; } .cross:before,.cross:after { content: ''; border-top: 2px solid #3E474F; width: 15px; display: block; margin-top: 18px; transition: 0.3s; } .cross:after { transform: rotate(90deg); margin-top: -2px; } .content1 { box-sizing: border-box; margin: 10px 10px; max-height: 0; overflow: hidden; transition: max-height, .5s; } input:checked ~ .content1 { max-height: 400px; transition: max-height, 1s; } input:checked ~ label .cross:before { transform: rotate(180deg); } input:checked ~ label .cross:after { transform: rotate(0deg); } .questions{ margin-top:20px; max-height: 0; overflow: hidden; transition: max-height, .5s; } .questions label{ border:none; box-shadow: none; margin:0; } input:checked ~ .questions { max-height: 400px; border-bottom:2px solid #3E474F; transition: 1s; } /*----------tool-tip------------*/ .tip { color: #f03768; cursor: help; position: relative; overflow: visible; } .tip:before, .tip:after { position: absolute; opacity: 0; z-index: -100; transform: translateY(-30%); transition: .4s; } .tip:before { content: ''; border-style: solid; border-width: 0.8em 0.5em 0 0.5em; border-color: #3E474F transparent transparent transparent; transform: translateY(-200%); bottom:90%; left:50%; } .tip:after { content: attr(data-tip); background: #3E474F; color: white; width: 150px; padding: 10px; bottom: 150%; left: -50%; } .tip:hover:before, .tip:hover:after { opacity: 1; z-index: 100; transform: scaleY(1); } @media screen and (min-width: 0px) and (max-width: 575px) { .wrapper1 { display: none; } /* show it on small screens */ .faqaccordion { display:block; } } @media screen and (min-width: 576px) and (max-width: 720px) { .label1 { display: flex; width: 100%; height: 80px; cursor: pointer; border: 3px solid #3E474F; user-select: none; } } @media screen and (min-width: 576px) and (max-width: 10648px) { .wrapper1 { display: block; } /* show it on small screens */ .faqaccordion { display:none; } } Frequently asked questions about TIKO-G Castable Resin  What is the TIKO-G Castable Resin? TIKO-G Castable Resin is the first jewelry casting resin made from more than 25 percent renewable raw materials. TIKO-G Castable Resin is an acrylate photopolymer, a synthetic resin developed specifically for investment casting. TIKO-G Castable Resin burns out without leaving residues and is therefore used for the production of jewelry with filigree details in the most innovative investment casting process. Particularly smooth casting surfaces, detail accuracy as well as short curing times characterize this technology. Who is the Castable Resin suitable for? TIKO-G Castable Resin allows you to create high quality jewelry creations without much effort through flexible burnout and casting processes. Whether sophisticated bridal accessories or intricate design jewelry - highly detailed jewelry pieces can be printed with the easily castable resin. Low expansion, compatibility with industry-leading investment materials and residue-free burnout make TIKO-G Castable Resin particularly attractive to jewelers. The casting process and short curing time without post-curing also speeds up and simplifies the workflow. This makes TIKO-G Castable Resin the ideal material for your jewelry business. Whether you are a beginner or advanced, a mass producer or a craftsman, TIKO-G Castable Resin makes the production of 3D printed jewelry easier and more efficient. How do goldsmiths use resin? With powerful equipment and materials, designers and manufacturers are saving time traditionally spent manually preparing jewelry. With cost-effective, intuitive desktop 3D printing capabilities like the Formlabs Form 2, high-quality 3D printing is becoming increasingly affordable and scalable for jewelers. Highly detailed jewelry is known to require painstaking and time-consuming manual labor. But in our fast-paced world of high demand and short-lived trends, jewelry made by hand can usually struggle to keep up. The development of castable resin now enables first-class manufacturing on affordable 3D printers. It combines exceptionally high strength with a smooth surface finish. The precise print settings capture even the smallest detail. Subtleties such as filigree wires, meshes or pavé settings are highlighted and precisely captured. Castable resin with a wax content of over 25 percent enables very clean casting and reliable burnout. It is suitable for standard burnout schedules on the one hand and for shortened eight-hour burnout schedules on the other. The resins developed by TIKO-G for investment casting and jewelry making reproduce fine detail and and allow for custom jewelry pieces at an affordable price. Castable resin is therefore more in demand than ever throughout the manufacturing process for goldsmiths, jewelry designers and jewelers. At what temperature does the resin melt? Castable resin does not melt. Instead, sublimation begins at 130 degrees Celsius. Sublimation is the term used to describe the transition process of a solid material into the gas phase. The recommended burnout schedule is designed to allow Castable Resin to slowly transition to the gaseous state. The gradual sublimation prevents rapid expansion of the printed part so that cracks do not form in the investment material. What is the castable resin used for? Castable resin is used for casting filigree jewelry, among other things. Both detailed and voluminous models can be easily printed with Castable Resin. The simplified and accelerated burn-out and direct investment casting process without post-curing allows you to finish with only little effort. Castable Resin printed parts are strong enough and suitable for both prototyping and fitting before actual production. You can use TIKO-G Castable Resin for the following: All jewelry models Jewelry with intricate details, thin walls, pavé settings and fine surface details Larger castable parts Prototype fabrication Jewelry customization How much castable resin do you need? To determine the amount of Castable Resin you need, you can use the following formula as a guide: Length x width x height x density You can take the exact density from the product data sheet, whereby the guideline value is about 1.2 g/cm³. Frequently asked questions about TIKO-G Castable Resin Who is Castable Resin suitable for? TIKO-G Castable Resin allows you to create high quality jewelry creations without much effort through flexible burnout and casting processes. From sophisticated bridal accessories to intricate designer jewelry, Castable Resin can be used to print highly detailed jewelry pieces. Low expansion, compatibility with industry-leading investment materials and residue-free burnout make TIKO-G Castable Resin particularly attractive to jewelers. The casting process and short curing time without post-curing also speeds up and simplifies the workflow. This makes TIKO-G Castable Resin the ideal material for your jewelry business. Whether you are a beginner or advanced, a mass producer or a craftsman, TIKO-G Castable Resin makes the production of 3D printed jewelry easier and more efficient. How do goldsmiths use resin? With powerful equipment and materials, designers and manufacturers are saving time traditionally spent manually preparing jewelry. With cost-effective, intuitive desktop 3D printing capabilities like the Formlabs Form 2, high-quality 3D printing is becoming increasingly affordable and scalable for jewelers. Highly detailed jewelry is known to require painstaking and time-consuming manual labor. But in our fast-paced world of high demand and short-lived trends, jewelry made by hand can usually struggle to keep up. The development of castable resin now enables first-class manufacturing on affordable 3D printers. It combines exceptionally high strength with a smooth surface finish. The precise print settings capture even the smallest detail. Subtleties such as filigree wires, meshes or pavé settings are highlighted and precisely captured. Castable resin with a wax content of over 25 percent enables very clean casting and reliable burnout. It is suitable for standard burnout schedules on the one hand and for shortened eight-hour burnout schedules on the other. The resins developed by TIKO-G for investment casting and jewelry making reproduce fine detail and and allow for custom jewelry pieces at an affordable price. Castable resin is therefore more in demand than ever throughout the manufacturing process for goldsmiths, jewelry designers and jewelers. At what temperature does the resin melt? Castable resin does not melt. Instead, sublimation begins at 130 degrees Celsius. Sublimation is the term used to describe the transition process of a solid material into the gas phase. The recommended burnout schedule is designed to allow Castable Resin to slowly transition to the gaseous state. The gradual sublimation prevents the rapid expansion of the printed part so that no cracks form in the investment material. What is castable resin used for? Castable resin is used for casting filigree jewelry, among other things. Both detailed and voluminous models can be easily printed with Castable Resin. The simplified and accelerated burnout and direct investment casting process without post-curing allows you to finish with only minimal effort. Castable Resin printed parts are strong enough and suitable for both prototyping and fitting before actual production. You can use TIKO-G Castable Resin for the following: All jewelry models Jewelry with intricate details, thin walls, pavé settings and fine surface details Larger castable parts Prototype production Jewelry customization How much Castable Resin do you need? To determine the amount of Castable Resin you need, you can use the following formula as a guide: Length x width x height x density The exact density can be found in the product data sheet, whereby the guide value is about 1.2 g/cm³.

Variants from €99.00*
€189.00*
Castable Resin Material for 3D Printing for Jewelry | TIKO-G Pro
Content: 0,5 kg
TIKO-G Pro is the first product of a new generation of compression resins. TIKO-G Pro is the first cast material with a proportion of over 20% of sustainable raw materials. TIKO-G Pro is absolutely dimenstion stable after printing. No matter if poured directly after printing or only after a week. The dimension always remains the same.TIKO-G Pro burns ash-free even at temperatures up to 700°TIKO-G Pro can be processed with common DLP, SLA and LCD printers.TIKO-G Pro has been developed and is produced in Germany. Color: wine red Content: 0.5kg / 1 kg .btn-flyer-download { transition-duration: 0.4s; } .btn-flyer-download:hover { background-color: #b30000; color: white; } .btn-flyer-download{ background-color: #4CAF50; /* Green */ border: none; color: white; padding: 10px 40px; text-align: center; text-decoration: none; display: inline-block; font-size: 16px; border-radius: 8px; text-align:left; background-color: red; } Download Productinformation .column { float: left; width: 20%; padding: 10px; height: 300px; /* Should be removed. Only for demonstration */ text-align:center; background-color: transparent; } /* Clear floats after the columns */ .row:after { content: ""; display: table; clear: both; background-color: transparent; } .dot { height: 55px; width: 55px; text-align: center; display: inline-block; background-image:url('/media/98/e5/7f/1632732860/1.png'); } @media screen and (max-width: 648px) { .column { width: 50%; height: 250px; } @media screen and (max-width: 330px) { .column { width: 100%; height: 240px; }}   25% wax for super detailed printing   100% ash-free combustion from 700 degrees   100% dimensionally stable after printing   For all DLP, SLA and LCD printers   Made from 20% + sustainable raw materials /* Three image containers (use 25% for four, and 50% for two, etc) */ .column1 { float: left; width: 33.33%; padding-left: 9%; padding-right:9%; padding-top:2%; padding-bottom:2%; margin:auto; text-align:center; align:center; } /* Clear floats after image containers */ .row1::after { content: ""; clear: both; display: table; } @media screen and (max-width: 600px) { .column1 { width: 100%; padding-left: 8%; padding-right:8%; padding-top:2%; padding-bottom:2%; }   Castable resin for innovative goldsmiths     Castable Resin Burnout - Sequence of the lost wax casting process   The lost wax process is a molding process for glass and metal casting. Usually, one-piece molds are made of wax. In the course of the process, not only the model but also the mold is destroyed. In the lost wax process, the model is provided with both sprue and vent channels.   1. Preparation Preparation of molding material and coating with molding material/investment material, which leads to the formation of green mold. 2. Melting out the green mold Melting out the green mold creates a mold cavity, which is dried in the case of water-containing molding materials. For plaster models, partial vacuum drying is required beforehand. 3. Melting process Depending on the investment material, firing of the mold takes place. The molten glass or metal is poured into the respective mold. The molten mass solidifies in the mold. Now the mold is smashed so that the raw casting can be removed.   Customer reviews of TIKO-G Pro   .columnreview { float: left; width: 25%; padding: 10px; height: 345px; /* Should be removed. Only for demonstration */ text-align:left; background-color: white; } img { float: left; width: 100%; height: auto; /* Should be removed. Only for demonstration */ text-align:center; background-color: white; } /* Clear floats after the columns */ .row2:after { content: ""; display: table; clear: both; background-color: white; } @media screen and (max-width: 648px) { .columnreview { width: 50%; height: 255px; } @media screen and (max-width: 500px) { .columnreview { width: 50%; height: 270px; } @media screen and (max-width: 420px) { .columnreview { width: 50%; height: 315px; }   Thank you!! We were allowed to test the new resin with as first. Thanks again to the Mack4D team. :-) Marise de G.   Compatible with our DLP. Everything as expected!Jens M.   Finally! I'm really glad that now also times our industry of goldsmiths wakes up and becomes sustainable. 20% sustainable raw materials in TIKO-G are a good start in the right direction.Julia K.   It works! Was skeptical at first... but integrates well with our customer process. Burns after triple testing always completelyRudolph K. .banner5{ width:100%; overflow:hidden; height:100%; background-color:#FF9A9A; } .beratungzumprodukt { transition-duration: 0.4s; } .beratungzumprodukt:hover { background-color: #b30000; color: white; } .beratungzumprodukt{ background-color: #4CAF50; /* Green */ border: none; color: white; padding: 10px 40px; text-align: center; text-decoration: none; display: inline-block; font-size: 16px; border-radius: 8px; text-align:left; background-color: red; } .column2 { float: left; width: 20%; padding: 10px; height: 290px; /* Should be removed. Only for demonstration */ text-align:left; background-color:#FF9A9A; } .column3 { float: left; width: 30%; padding: 10px; height: 290px; /* Should be removed. Only for demonstration */ text-align:left; background-color:#FF9A9A; } .column4 { float: left; width: 30%; padding: 10px; height: 30px; /* Should be removed. Only for demonstration */ text-align:left; background-color:#FF9A9A; } /* Clear floats after the columns */ .row:after { content: ""; display: table; clear: both; } @media screen and (min-width: 706px) and (max-width: 976px) { .column2 { float: left; width: 5%; padding: 10px; height: 280px; text-align:left; background-color:#FF9A9A; } .column3 { float: left; width: 55%; padding: 10px; height: 280px; text-align:left; background-color:#FF9A9A; } .column4 { float: left; width: 32%; padding: 10px; height: 20px; /* Should be removed. Only for demonstration */ text-align:left; background-color:#FF9A9A; } } @media screen and (min-width: 706px) and (max-width: 10976px) { .banner5{ display:block; } .column3{ display:block; } .column4{ display:block; } .imgcolumn4{ display:block; } .spaceinbetween{ display:block; } .banner9{ display:none; } } @media screen and (min-width: 0px) and (max-width: 705px) { .banner5{ display:none; } .column3{ display:none; } .column4{ display:none; } .imgcolumn4{ display:none; } .spaceinbetween{ display:none; } } @media screen and (min-width: 0px) and (max-width: 10703px) { .banner8 { display: none; } /* show it on small screens */ } @media screen and (min-width: 0px) and (max-width: 705px) { .banner9 { display: block; } /* show it on small screens */ } @media screen and (min-width: 0px) and (max-width: 705px) { .banner8space { display: block; } /* show it on small screens */ } @media screen and (min-width: 706px) and (max-width: 10698px) { .banner8space { display: none; } /* show it on small screens */ } @media screen and (min-width: 0px) and (max-width: 648px) { .banner9spacebetween { display: block; } /* show it on small screens */ } @media screen and (min-width: 649px) and (max-width: 10648px) { .banner9spacebetween { display: none; } /* show it on small screens */ } .banner8 { align:center; text-align:center; background-color:#FF9A9A; } .beratungzumproduktt { transition-duration: 0.4s; } .beratungzumproduktt:hover { background-color: #b30000; color: white; } .beratungzumproduktt{ background-color: #4CAF50; /* Green */ border: none; color: white; padding: 10px 40px; text-align: center; text-decoration: none; display: inline-block; font-size: 16px; border-radius: 8px; text-align:left; background-color: red; } Product consultation Do you have questions about the product? Let us advise you free of charge! Free consultation +49 (0) 34342 540640 Marc Hütt, CEO   Product consultation You have questions about the product? Let us advise you free of charge!  Free consultation   +49 (0) 34342 540640  Marc Hütt, CEO   Product consultation Do you have questions about the product? Let us advise you free of charge!  Free consultation   +49 (0) 34342 540640  Marc Hütt, CEO Castable Resin TIKO-G Pro supports popular 3D printers  TIKO-G Pro Castable Resin is the first jewelry casting resin made from more than 25 percent renewable raw materials. In addition to its sustainability, TIKO-G Pro Castable Resin scores with its outstanding product properties. For perfect details in our casting, we use at least 25 % of wax in this pro version. The material is absolutely dimensionally stable after printing, so you can embed the printed model immediately. In addition, TIKO-G Pro Castable Resin is compatible with most 3D printers. AdvantagesSuitable for all models created in the investment casting process. Can be burned out. No expansion occurs during burnout. Low ash content during the burnout process. Sublimation starts at 130 degrees Celsius. Compatible with many gypsum-bonded investments. Very high detail accuracy. Excellent casting of small engravings (both positive and negative). Perfect, smooth surfaces. Cleaning with commercial spirit.   TIKO-G Pro for DLP Printers  TIKO-G Pro's burn-out, castable resin is monomer-based and excellent for LCD as well as DLP 3D printers. Both handling and post-processing are very easy. TIKO-G Pro is suitable for all models produced by investment casting. The castable resin is used in jewelry and dental models. Using CAD programs, dentists, jewelers and designers can design their objects digitally and produce them immediately afterwards - in maximum resolution (depending on the printer).   Our Castable Resin for SLA Printer  Our Castable Resin is a castable resin for use with SLA and DLP 3D printers. You can use the TIKO-G Pro for all investment cast models. Classic applications include jewelry and dental models. After jewelers and dentists as well as designers have created their designs using CAD programs, they can immediately turn the respective designs into reality. TIKO-G Pro allows you to cast optimally with common wax equipment and plaster-bonded investment materials. The photopolymer, which is filled with up to 80 percent wax, not only burns out cleanly, but without any ash content. The castable resin captures very complex details and allows for very smooth surfaces. This results in high-strength jewelry pieces that require large amounts of metal. The high accuracy of the details allows excellent reproduction of lettering, pavé settings or very thin lines. Even at lower temperatures of 750 degrees Celsius, full burnout is guaranteed, which is the best solution for stone presetting.   Jewelry Resin for LCD Printer  TIKO-G Pro's castable resin adopts in both LCD and DLP 3D printers. It is used in highly detailed models of all types of investment casting processes. Dentists and jewelers in particular swear by castable resin because they can easily design their objects using CAD programs and then immediately create an investment casting mold. Especially for the realization of complicated models with high dimensional accuracy, TIKO-G Pro is the ideal solution. It enables perfect casting quality with any investment material. .wrapper1 { max-width: 80%; width: 80%; margin: 10vh auto; } input { display: none; } .label1 { display: flex; width: 100%; height: 40px; cursor: pointer; border: 3px solid #3E474F; user-select: none; } .label1 div:first-child { width: 100%; line-height: 45px; margin-left: 10px; font-size: 1.2em; } .cross{ margin-right:15px; margin-top:3px; } .cross:before,.cross:after { content: ''; border-top: 2px solid #3E474F; width: 15px; display: block; margin-top: 18px; transition: 0.3s; } .cross:after { transform: rotate(90deg); margin-top: -2px; } .content1 { box-sizing: border-box; margin: 10px 10px; max-height: 0; overflow: hidden; transition: max-height, .5s; } input:checked ~ .content1 { max-height: 400px; transition: max-height, 1s; } input:checked ~ label .cross:before { transform: rotate(180deg); } input:checked ~ label .cross:after { transform: rotate(0deg); } .questions{ margin-top:20px; max-height: 0; overflow: hidden; transition: max-height, .5s; } .questions label{ border:none; box-shadow: none; margin:0; } input:checked ~ .questions { max-height: 400px; border-bottom:2px solid #3E474F; transition: 1s; } /*----------tool-tip------------*/ .tip { color: #f03768; cursor: help; position: relative; overflow: visible; } .tip:before, .tip:after { position: absolute; opacity: 0; z-index: -100; transform: translateY(-30%); transition: .4s; } .tip:before { content: ''; border-style: solid; border-width: 0.8em 0.5em 0 0.5em; border-color: #3E474F transparent transparent transparent; transform: translateY(-200%); bottom:90%; left:50%; } .tip:after { content: attr(data-tip); background: #3E474F; color: white; width: 150px; padding: 10px; bottom: 150%; left: -50%; } .tip:hover:before, .tip:hover:after { opacity: 1; z-index: 100; transform: scaleY(1); } @media screen and (min-width: 0px) and (max-width: 575px) { .wrapper1 { display: none; } /* show it on small screens */ .faqaccordion { display:block; } } @media screen and (min-width: 576px) and (max-width: 720px) { .label1 { display: flex; width: 100%; height: 80px; cursor: pointer; border: 3px solid #3E474F; user-select: none; } } @media screen and (min-width: 576px) and (max-width: 10648px) { .wrapper1 { display: block; } /* show it on small screens */ .faqaccordion { display:none; } } Frequently asked questions about TIKO-G Pro Castable Resin  What is the main difference between the old TIKO-G and the new TIKO-G Pro Resin? After we received a lot of feedback about our first version of TIKO-G, we decided to put the castable resin on another level. So we developed the new TIKO-G Pro. For super detailed casting the Pro now has at least 25 % of wax. Compared to the TIKO-G we expected jewelers to have even more precise results. What is the TIKO-G Pro Castable Resin? TIKO-G Pro Castable Resin is the first jewelry casting resin made from more than 25 percent renewable raw materials. TIKO-G Pro Castable Resin is an acrylate photopolymer, a synthetic resin developed specifically for investment casting. TIKO-G Pro Castable Resin burns out without leaving residues and is therefore used for the production of jewelry with filigree details in the most innovative investment casting process. Particularly smooth casting surfaces, detail accuracy as well as short curing times characterize this technology. Who is the Castable Resin suitable for? TIKO-G Pro Castable Resin allows you to create high quality jewelry creations without much effort through flexible burnout and casting processes. Whether sophisticated bridal accessories or intricate design jewelry - highly detailed jewelry pieces can be printed with the easily castable resin. Low expansion, compatibility with industry-leading investment materials and residue-free burnout make TIKO-G Pro Castable Resin particularly attractive to jewelers. The casting process and short curing time without post-curing also speeds up and simplifies the workflow. This makes TIKO-G Pro Castable Resin the ideal material for your jewelry business. Whether you are a beginner or advanced, a mass producer or a craftsman, TIKO-G Pro Castable Resin makes the production of 3D printed jewelry easier and more efficient. How do goldsmiths use resin? With powerful equipment and materials, designers and manufacturers are saving time traditionally spent manually preparing jewelry. With cost-effective, intuitive desktop 3D printing capabilities like the Formlabs Form 2, high-quality 3D printing is becoming increasingly affordable and scalable for jewelers. Highly detailed jewelry is known to require painstaking and time-consuming manual labor. But in our fast-paced world of high demand and short-lived trends, jewelry made by hand can usually struggle to keep up. The development of castable resin now enables first-class manufacturing on affordable 3D printers. It combines exceptionally high strength with a smooth surface finish. The precise print settings capture even the smallest detail. Subtleties such as filigree wires, meshes or pavé settings are highlighted and precisely captured. Castable resin with a wax content of over 25 percent enables very clean casting and reliable burnout. It is suitable for standard burnout schedules on the one hand and for shortened eight-hour burnout schedules on the other. The resins developed by TIKO-G Pro for investment casting and jewelry making reproduce fine detail and and allow for custom jewelry pieces at an affordable price. Castable resin is therefore more in demand than ever throughout the manufacturing process for goldsmiths, jewelry designers and jewelers. At what temperature does the resin melt? Castable resin does not melt. Instead, sublimation begins at 130 degrees Celsius. Sublimation is the term used to describe the transition process of a solid material into the gas phase. The recommended burnout schedule is designed to allow Castable Resin to slowly transition to the gaseous state. The gradual sublimation prevents rapid expansion of the printed part so that cracks do not form in the investment material. What is the castable resin used for? Castable resin is used for casting filigree jewelry, among other things. Both detailed and voluminous models can be easily printed with Castable Resin. The simplified and accelerated burn-out and direct investment casting process without post-curing allows you to finish with only little effort. Castable Resin printed parts are strong enough and suitable for both prototyping and fitting before actual production. You can use TIKO-G Pro Castable Resin for the following: All jewelry models Jewelry with intricate details, thin walls, pavé settings and fine surface details Larger castable parts Prototype fabrication Jewelry customization How much castable resin do you need? To determine the amount of Castable Resin you need, you can use the following formula as a guide: Length x width x height x density You can take the exact density from the product data sheet, whereby the guideline value is about 1.2 g/cm³. Frequently asked questions about TIKO-G Pro Castable Resin What is the TIKO-G Pro Castable Resin? TIKO-G Pro Castable Resin is the first jewelry casting resin made from more than 25 percent renewable raw materials. TIKO-G Pro Castable Resin is an acrylate photopolymer, a synthetic resin developed specifically for investment casting. TIKO-G Pro Castable Resin burns out without leaving residues and is therefore used for the production of jewelry with filigree details in the most innovative investment casting process. Particularly smooth casting surfaces, detail accuracy as well as short curing times characterize this technology. Who is the Castable Resin suitable for? TIKO-G Pro Castable Resin allows you to create high quality jewelry creations without much effort through flexible burnout and casting processes. Whether sophisticated bridal accessories or intricate design jewelry - highly detailed jewelry pieces can be printed with the easily castable resin. Low expansion, compatibility with industry-leading investment materials and residue-free burnout make TIKO-G Pro Castable Resin particularly attractive to jewelers. The casting process and short curing time without post-curing also speeds up and simplifies the workflow. This makes TIKO-G Pro Castable Resin the ideal material for your jewelry business. Whether you are a beginner or advanced, a mass producer or a craftsman, TIKO-G Pro Castable Resin makes the production of 3D printed jewelry easier and more efficient. How do goldsmiths use resin? With powerful equipment and materials, designers and manufacturers are saving time traditionally spent manually preparing jewelry. With cost-effective, intuitive desktop 3D printing capabilities like the Formlabs Form 2, high-quality 3D printing is becoming increasingly affordable and scalable for jewelers. Highly detailed jewelry is known to require painstaking and time-consuming manual labor. But in our fast-paced world of high demand and short-lived trends, jewelry made by hand can usually struggle to keep up. The development of castable resin now enables first-class manufacturing on affordable 3D printers. It combines exceptionally high strength with a smooth surface finish. The precise print settings capture even the smallest detail. Subtleties such as filigree wires, meshes or pavé settings are highlighted and precisely captured. Castable resin with a wax content of over 25 percent enables very clean casting and reliable burnout. It is suitable for standard burnout schedules on the one hand and for shortened eight-hour burnout schedules on the other. The resins developed by TIKO-G Pro for investment casting and jewelry making reproduce fine detail and and allow for custom jewelry pieces at an affordable price. Castable resin is therefore more in demand than ever throughout the manufacturing process for goldsmiths, jewelry designers and jewelers. At what temperature does the resin melt? Castable resin does not melt. Instead, sublimation begins at 130 degrees Celsius. Sublimation is the term used to describe the transition process of a solid material into the gas phase. The recommended burnout schedule is designed to allow Castable Resin to slowly transition to the gaseous state. The gradual sublimation prevents rapid expansion of the printed part so that cracks do not form in the investment material. What is the castable resin used for? Castable resin is used for casting filigree jewelry, among other things. Both detailed and voluminous models can be easily printed with Castable Resin. The simplified and accelerated burn-out and direct investment casting process without post-curing allows you to finish with only little effort. Castable Resin printed parts are strong enough and suitable for both prototyping and fitting before actual production. You can use TIKO-G Pro Castable Resin for the following: All jewelry models Jewelry with intricate details, thin walls, pavé settings and fine surface details Larger castable parts Prototype production Jewelry customization How much castable resin do you need? To determine the amount of Castable Resin you need, you can use the following formula as a guide: Length x width x height x density You can take the exact density from the product data sheet, whereby the guideline value is about 1.2 g/cm³.

€99.00*
MACK4D - clean
Content: 1 l
MACK4D Resin Clean is made for thorough, quick and easy cleaning of resin on printed parts. It creates a clean, smooth surface with no surface cracks or white residue. The cleaning liquid is a non-flammable, water-soluble and safe cleaning liquid that is a cleaner alternative to alcoholic and other organic solvents. Processing instructions For best results, spray the surface of your printed part with the cleaner until the uncured resin is completely removed. Alternatively, the object can be cleaned in a small ultrasonic bath for 2 x 5 minutes without heat. The parts can then be postcured.

€19.90*
Tip
MACK4D - Tiko-G Pro jewel cast
Content: 0,5 kg
MACK4D´s innovative direct investment casting material This easy to cast material has over 25% wax. MACK4D Tiko-G pro jewel cast resin  is absolutely dimenstion stable after printing. No matter if poured directly after printing or only after a week. The dimension always remains the same.MACK4D  Tiko-G pro jewel cast resin burns ash-free even at temperatures up to 700°MACK4D  Tiko-G pro jewel cast resin can be processed with common DLP, SLA and LCD printers.MACK4D   Tiko-G pro jewel cast resin has been developed and is produced in Germany.https://youtu.be/DnD3zAusN8U

€189.00*
Tip
Microlay EVE Printer
The Microlay EVE 3D printer has been specially developed for the ambitious user. The Eve impresses with its robust design with steel and aluminium components, which increases the durability and repeatability. Furthermore, the 5 inch colour display, a sufficiently large material tray (150 ml) and the possibility to control the printer from any input device via Teamviewer make it very easy to use. Of course, the printer can be controlled via WiFi as well as via the network. Size: 250 x 265 x 500 mm Weight: 12 kg Installation space: 120 mm x 68 mm x 180 mm Resolution (x y): 47 my resolution (z) freely selectable from 1 - 100 my Maximum printing speed 40 mm per hour Technology LCD Wavelength 405 NM

€3,449.00*
Panther 3D software for jewellery creation
Panther 3D is the new software for easy modelling of jewellery. In addition to an outstanding price/performance ratio, the software is characterised by simple intuitive control. Start your project from the interactive extensive library or create your unique piece yourself starting from the sketch. No matter if arm rings, ornaments, rings etc. every piece of jewellery can be individualised easily. Start your own production with Panther now. We are also happy to offer training courses with our partner Andreas Moos (https://www.andreasmoos.de/). Ask for the next dates by e-mail, or download your demo version here (https://www.panther3d.com/try).

€2,495.00*